Prestige 662H/HW Series User’s Guide
Figure 162 Menu 3.2.1 IP Alias Setup
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Follow the instructions in the following table to configure IP Alias parameters.
Table 113 Menu 3.2.1 IP Alias Setup
FIELD | DESCRIPTION |
|
|
IP Alias | Choose Yes to configure the LAN network for the Prestige. |
|
|
IP Address | Enter the IP address of your Prestige in dotted decimal notation |
|
|
IP Subnet Mask | Your Prestige will automatically calculate the subnet mask based on the IP address |
| that you assign. Unless you are implementing subnetting, use the subnet mask |
| computed by the Prestige |
RIP Direction | Press [SPACE BAR] to select the RIP direction. Choices are None, Both, In Only |
| or Out Only. |
Version | Press [SPACE BAR] to select the RIP version. Choices are |
| 2M. |
Incoming | Enter the filter set(s) you wish to apply to the incoming traffic between this node and |
Protocol Filters | the Prestige. |
Outgoing | Enter the filter set(s) you wish to apply to the outgoing traffic between this node and |
Protocol Filters | the Prestige. |
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.
30.5 Route IP Setup
The first step is to enable the IP routing in Menu 1 — General Setup.
To edit menu 1, type 1 in the main menu and press [ENTER]. Set the Route IP field to Yes by pressing [SPACE BAR].
Chapter 30 Internet Access | 322 |