Prestige 662H/HW Series User’s Guide

Figure 262 Menu 24 System Maintenance

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Upload Firmware

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management

Enter Menu Selection Number:

Then enter 10 to go to Menu 24.10 System Maintenance Time and Date Setting to update the time and date settings of your Prestige as shown in the following screen.

Figure 263 Menu 24.10 System Maintenance: Time and Date Setting

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= None

 

 

Time Server Address= N/A

00 : 51 :

24

Current Time:

New Time (hh:mm:ss):

00 : 51 :

19

Current Date:

2000 - 01

- 01

New Date (yyyy-mm-dd):

2000 - 01

- 01

Time Zone= GMT

 

 

Daylight Saving= No

01

- 00

Start Date (mm-dd):

End Date (mm-dd):

01

- 00

Press ENTER to Confirm or ESC to Cancel:

Table 144 Menu 24.10 System Maintenance: Time and Date Setting

FIELD

DESCRIPTION

 

 

Use Time Server

Enter the time service protocol that your time server sends when you turn on

when Bootup

the Prestige. Not all time servers support all protocols, so you may have to

 

check with your ISP/network administrator or use trial and error to find a

 

protocol that works. The main differences between them are the format.

 

Daytime (RFC 867) format is day/month/year/time zone of the server.

 

Time (RFC-868)format displays a 4-byte integer giving the total number of

 

seconds since 1970/1/1 at 0:0:0.

 

NTP (RFC-1305) is similar to Time (RFC-868).

 

None. The default, enter the time manually.

 

 

Time Server Address

Enter the IP address or domain name of your time server. Check with your ISP/

 

network administrator if you are unsure of this information.

415

Chapter 41 System Maintenance