Prestige 662H/HW Series User’s Guide

Table 110 TCP/IP Ethernet Setup (continued)

FIELD

DESCRIPTION

 

 

IP Subnet Mask

Your Prestige will automatically calculate the subnet mask based on the IP address

 

that you assign. Unless you are implementing subnetting, use the subnet mask

 

computed by the Prestige (refer to the IP Subnetting appendix for more information).

RIP Direction

Press [SPACE BAR] to select the RIP direction. Choices are Both, In Only, Out

 

Only or None.

Version

Press [SPACE BAR] to select the RIP version. Choices are RIP-1, RIP-2Bor RIP-

 

2M.

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to

 

establish membership in a Multicast group. The Prestige supports both IGMP

 

version 1 (IGMP-v1) and version 2 (IGMP-v2). Press the [SPACE BAR] to enable

 

IP Multicasting or select None to disable it.

IP Policies

Create policies using SMT menu 25 (see Chapter 43 IP Policy Routing ) and apply

 

them on the Prestige LAN interface here. You can apply up to four IP Policy sets

 

(from twelve) by entering their numbers separated by commas.

Edit IP Alias

The Prestige supports three logical LAN interfaces via its single physical Ethernet

 

interface with the Prestige itself as the gateway for each LAN network. Press

 

[SPACE BAR] to change No to Yes and press [ENTER] to display Menu 3.2.1.

315

Chapter 28 Menu 3 LAN Setup