|
| Prestige 662H/HW Series User’s Guide | |
| Table 147 Menu 25.1.1 IP Routing Policy (continued) | ||
|
|
|
|
| FIELD | DESCRIPTION |
|
|
|
|
|
| Gateway addr | Defines the outgoing gateway address. The gateway must be on the same |
|
|
| subnet as the Prestige if it is on the LAN, otherwise, the gateway must be the IP |
|
|
| address of a remote node. The default gateway is specified as 0.0.0.0. |
|
| Type of Service | Set the new TOS value of the outgoing packet. Prioritize incoming network traffic |
|
|
| by choosing No Change, Normal, Min Delay, Max Thruput, Max Reliable or |
|
|
| Min Cost. |
|
| Precedence | Set the new outgoing packet precedence value. Values are 0 to 7 or No |
|
|
| Change. |
|
| Log | Press [SPACE BAR] and then [ENTER] to select Yes to make an entry in the |
|
|
| system log when a policy is executed. |
|
| When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm |
| |
| or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel. |
| |
43.5 Applying an IP Policy
This section shows you where to apply the IP policies after you design them.
43.5.1 Ethernet IP Policies
From Menu 3 — Ethernet Setup, type 2 to go to Menu 3.2 — TCP/IP and DHCP Ethernet Setup.
You can choose up to four IP policy sets (from 12) by typing their numbers separated by commas, for example, 2, 4, 7, 9.
Chapter 43 IP Policy Routing | 426 |