Prestige 662H/HW Series User’s Guide

Figure 189 Menu 15.2 NAT Server Setup

Menu 15.2 - NAT Server Sets

1.

Server

Set 1 (Used for SUA Only)

2.

Server

Set 2

3.

Server

Set 3

4.

Server

Set 4

5.

Server

Set 5

6.

Server

Set 6

7.

Server

Set 7

8.

Server

Set 8

9.

Server

Set 9

10.

Server

Set 10

Enter Set

Number to Edit:

3Enter 1 to go to Menu 15.2.1 NAT Server Setup as follows.

Figure 190 Menu 15.2.1 NAT Server Setup

Menu 15.2 - NAT Server Setup

Rule Start Port No. End Port No. IP Address

---------------------------------------------------

1.

Default

Default

0.0.0.0

2.

21

21

192.168.1.33

3.

0

0

0.0.0.0

4.

0

0

0.0.0.0

5.

0

0

0.0.0.0

6.

0

0

0.0.0.0

7.

0

0

0.0.0.0

8.

0

0

0.0.0.0

9.

0

0

0.0.0.0

10.

0

0

0.0.0.0

11.

0

0

0.0.0.0

12.

0

0

0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

4Enter a port number in an unused Start Port No field. To forward only one port, enter it again in the End Port No field. To specify a range of ports, enter the last port to be forwarded in the End Port No field.

5Enter the inside IP address of the server in the IP Address field. In the following figure, you have a computer acting as an FTP, Telnet and SMTP server (ports 21, 23 and 25) at 192.168.1.33.

6Press [ENTER] at the “Press ENTER to confirm ...” prompt to save your configuration after you define all the servers or press [ESC] at any time to cancel.

351

Chapter 34 Network Address Translation (NAT)