Prestige 662H/HW Series User’s Guide

2Press the RESET button for ten seconds or until the PWR/SYS LED begins to blink and then release it. When the PWR/SYS LED begins to blink, the defaults have been restored and the Prestige restarts.

2.1.3Navigating the Prestige Web Configurator

The following summarizes how to navigate the web configurator from the SITE MAP screen. We use the Prestige 662HW-61 web screens in this guide as an example. Screens vary slightly for different Prestige models.

•Click Wizard Setup to begin a series of screens to configure your Prestige for the first time.

•Click a link under Advanced Setup to configure advanced Prestige features.

•Click a link under Maintenance to see Prestige performance statistics, upload firmware and back up, restore or upload a configuration file.

•Click Site Map to go to the Site Map screen.

•Click Logout in the navigation panel when you have finished a Prestige management session.

Figure 6 Web Configurator: Site Map Screen

Note: Click the icon (located in the top right corner of most screens) to view embedded help.

Chapter 2 Introducing the Web Configurator

56