Chapter 7 LAN
Each field is described in the following table.
Table 54 Network > LAN > Advanced
LABEL | DESCRIPTION |
RIP & Multicast Setup | |
|
|
RIP Direction | Use this field to control how much routing information the ZyXEL Device sends |
| and receives on the subnet. |
| None - The ZyXEL Device does not send or receive routing information on the |
| subnet. |
| Both - The ZyXEL Device sends and receives routing information on the subnet. |
| In Only - The ZyXEL Device only receives routing information on the subnet. |
| Out Only - The ZyXEL Device only sends routing information on the subnet. |
|
|
RIP Version | Select which version of RIP the ZyXEL Device uses when it sends or receives |
| information on the subnet. |
| |
| |
| |
|
|
Multicast | You do not have to enable multicasting to use |
| Select which version of IGMP the ZyXEL Device uses to support multicasting on |
| the LAN. Multicasting sends packets to some computers on the LAN and is an |
| alternative to unicasting (sending packets to one computer) and broadcasting |
| (sending packets to every computer). |
| None - The ZyXEL Device does not support multicasting. |
| |
| |
| Multicasting can improve overall network performance. However, it requires extra |
| processing and generates more network traffic. In addition, other computers on |
| the LAN have to support the same version of IGMP. |
|
|
Any IP Setup |
|
|
|
Active | Select this if you want to let computers on different subnets use the ZyXEL |
| Device. |
|
|
Windows Networking (NetBIOS over TCP/IP) | |
|
|
Allow between | Select this check box if you want the ZyXEL Device to send NetBIOS (Network |
LAN and WAN | Basic Input/Output System) packets between the LAN and WAN. You should also |
| make sure that NetBIOS packets are not blocked in Security > Firewall > |
| Services. |
| NetBIOS packets are TCP or UDP packets that enable a computer to connect to |
| and communicate with computers on other networks. It may sometimes be |
| necessary to allow NetBIOS packets to pass through the ZyXEL Device in order to |
| allow computers on the LAN to find computers on the WAN and vice versa. |
| This is the same setting you can set in Network > WAN > Advanced. |
|
|
Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
Cancel | Click this to set every field in this screen to its |
|
|
| 121 |
|
|