|
| Chapter 9 SIP |
| Table 63 VoIP > SIP > SIP Settings > Advanced | |
| LABEL | DESCRIPTION |
| Enable | Select this if you want to hear a waiting (beeping) dial tone on your phone when |
|
| you have at least one voice message. Your VoIP service provider must support |
|
| this feature. |
|
|
|
| Expiration Time | Keep the default value, unless your VoIP service provider tells you to change it. |
|
| Enter the number of seconds the SIP server should provide the message waiting |
|
| service each time the ZyXEL Device subscribes to the service. Before this time |
|
| passes, the ZyXEL Device automatically subscribes again. |
|
|
|
| Call Forward |
|
|
|
|
| Call Forward | Select which call forwarding table you want the ZyXEL Device to use for incoming |
| Table | calls. You set up these tables in VoIP > Phone Book > Incoming Call Policy. |
|
|
|
| Caller Ringing |
|
|
|
|
| Enable | Select the check box if you want to specify what tone people hear when they call |
|
| you. The ZyXEL Device provides a default tone, but you can add additional tones |
|
| using IVR. See Section 9.2 on page 138 for more information. |
|
|
|
| Caller Ringing | Select the tone you want people to hear when they call you. You should setup |
| Tone | these tones using IVR first. See Section 9.2 on page 138 for more information. |
|
|
|
| On Hold |
|
|
|
|
| Enable | Select the check box if you want to specify what tone people hear when you put |
|
| them on hold. The ZyXEL Device provides a default tone, but you can add |
|
| additional tones using IVR. See Section 9.2 on page 138 for more information. |
|
|
|
| On Hold Tone | Select the tone you want people to hear when you put them on hold. You should |
|
| setup these tones using IVR first. See Section 9.2 on page 138 for more |
|
| information. |
|
|
|
| <Back | Click this to return to the SIP Settings screen without saving your changes. |
|
|
|
| Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
|
| Cancel | Click this to set every field in this screen to its |
|
|
|
Use this screen to maintain ToS and VLAN settings for the ZyXEL Device. To access this screen, click VoIP > SIP > QoS.
Figure 81 VoIP > SIP > QoS
| 145 |
|
|