Chapter 3 Wizard Setup
3.2.3.3 Manually Assign a WEP key
Choose Basic(WEP) to setup WEP encryption parameters.
Figure 17 Manually Assign a WEP key
The following table describes the labels in this screen.
Table 9 Manually Assign a WEP key
LABEL | DESCRIPTION |
|
|
Passphrase | Enter a Passphrase (up to 32 printable characters) and clicking Generate. The ZyXEL |
| Device automatically generates a WEP key. |
WEP | Select |
Encryption | WEP is the weakest encryption and |
Key 1 - Key 4 | The WEP key is used to encrypt data. Both the ZyXEL Device and the wireless |
| stations must use the same WEP key for data transmission. |
| You can set 4 different keys and make one of the keys active at a time. |
| If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII |
| string) or 10, 26 or 58 hexadecimal characters |
| |
Back | Click Back to display the previous screen. |
Next | Click Next to proceed to the next screen. |
|
|
Exit | Click Exit to close the wizard screen without saving. |
|
|
3.2.3.4 OTIST Screen
This screen allows you to automatically configure security settings on your ZyXEL Device and the wireless clients that want to connect to it. See Section 5.2.5 on page 88 for more information on OTIST.
52 |
| |
| ||
|
|
|