ZyXEL Communications P-2302HWUDL-P1 Series 3.2.3 Wireless Network Setup

Chapter 3 Wizard Setup

The following table describes the labels in this screen.

Table 6 Connection Wizard > System Information

LABEL	DESCRIPTION
System Name	Enter your computer's "Computer Name". See Section 22.1 on page 261 for more
	information. This is for identification purposes, but some ISPs also check this field.
	This name can be up to 30 alphanumeric characters long. Spaces are not allowed,
	but dashes “-” and underscores "_" are accepted.

Domain Name	Enter the domain name entry that is propagated to DHCP clients on the LAN. If
	you leave this blank, the domain name obtained from the ISP is used. Use up to
	38 alphanumeric characters. Spaces are not allowed, but dashes “-” and periods
	"." are accepted.

< Back	Click this to go to the previous screen.

Next >	Click this to go to the next screen.

Exit	Click this to close this screen and return to the main screen.

3.2.3 Wireless Network Setup

Use the following screens to set up your wireless LAN.

3.2.3.1 Wireless LAN - General Information

Configure your wireless settings in this screen, then click Next.

Figure 15 Wireless LAN

The following table describes the labels in this screen.

Table 7 Wireless LAN Setup Wizard 2

LABEL	DESCRIPTION

Name(SSID)	Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
	LAN.
	If you change this field on the ZyXEL Device, make sure all wireless stations use the
	same SSID in order to access the network.
Channel	The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a
Selection	channel. Select a channel ID that is not already in use by a neighboring device.