Chapter 10 Phone
Table 68 VoIP > Phone > Analog Phone > Advanced
LABEL | DESCRIPTION |
Apply | Click this to save your changes and to apply them to the ZyXEL Device. |
|
|
Cancel | Click this to set every field in this screen to its |
|
|
10.3 DECT Base Station Overview
Your ZyXEL Device has a built in Digital Enhanced Cordless Telecommunications (DECT) base station. DECT is an ETSI (European Telecommunications Standards Institute) standard for digital cordless phones which specifies how they transmit, receive and process data and voice communication.
Figure 84 DECT Base Station Overview
The DECT base station follows the Generic Access Profile (GAP). GAP (a subset of DECT) specifies how DECT phones register with a DECT base station. The DECT GAP standard ensures that two different products (a phone and a base station) from different manufacturers can work together. Any phone that supports GAP can make and receive calls through the ZyXEL Device.
10.3.1 DECT Phone Registration
In order to use your DECT phone with the ZyXEL Device, the DECT phone must register with the ZyXEL Device’s DECT base station. Follow these steps to register your DECT phone with the ZyXEL Device.
1Press down the DECT base station button (A) on top of your ZyXEL Device for 6 to 11 seconds to put the ZyXEL Device in registration mode.
Registration mode refers to the state of the ZyXEL Device when it is scanning for DECT phones in its surrounding area. The ZyXEL Device stays in registration mode for 30 seconds.
"If you press the DECT base station button for 12 seconds or more, the DECT base station resets and all previously registered DECT phones must be re- registered.
| 153 |
|
|