Chapter 5 Wireless LAN

Table 39 Wireless: WPA(2)

LABEL

 

DESCRIPTION

Group Key Update

 

The Group Key Update Timer is the rate at which the AP (if using WPA-PSK

Timer

 

key management) or RADIUS server (if using WPA key management) sends a

 

 

new group key out to all clients. The re-keying process is the WPA equivalent of

 

 

automatically changing the WEP key for an AP and all stations in a WLAN on a

 

 

periodic basis. Setting of the Group Key Update Timer is also supported in

 

 

WPA-PSKmode. The ZyXEL Device default is 1800 seconds (30 minutes).

 

 

 

Authentication Server

 

 

 

IP Address

 

Enter the IP address of the external authentication server in dotted decimal

 

 

notation.

 

 

 

Port Number

 

Enter the port number of the external authentication server. The default port

 

 

number is 1812.

 

 

You need not change this value unless your network administrator instructs you

 

 

to do so with additional information.

 

 

 

Shared Secret

 

Enter a password (up to 31 alphanumeric characters) as the key to be shared

 

 

between the external authentication server and the ZyXEL Device.

 

 

The key must be the same on the external authentication server and your ZyXEL

 

 

Device. The key is not sent over the network.

 

 

Accounting Server (optional)

 

 

Active

 

Select the checkbox to activate the external accounting server.

 

 

 

IP Address

 

Enter the IP address of the external accounting server in dotted decimal notation.

 

 

 

Port Number

 

Enter the port number of the external accounting server. The default port number

 

 

is 1813.

 

 

You need not change this value unless your network administrator instructs you

 

 

to do so with additional information.

 

 

 

Shared Secret

 

Enter a password (up to 31 alphanumeric characters) as the key to be shared

 

 

between the external accounting server and the ZyXEL Device.

 

 

The key must be the same on the external accounting server and your ZyXEL

 

 

Device. The key is not sent over the network.

 

 

 

5.5 OTIST Screen

Use this screen to set up and start OTIST on the ZyXEL Device in your wireless network. To open this screen, click Network > Wireless LAN > OTIST.

Figure 48 Network > Wireless LAN > OTIST

94

 

P-2302HWUDL-P1 Series User’s Guide