Chapter 5 Wireless LAN
5.7 Wireless LAN Advanced Setup
To configure advanced wireless settings, click the Advanced Setup button in the General screen. The screen appears as shown.
Figure 54 Wireless LAN: Advanced
The following table describes the labels in this screen.
Table 42 Wireless LAN: Advanced
LABEL | DESCRIPTION |
Wireless Advanced Setup | |
|
|
RTS/CTS | Enter a value between 0 and 2432. |
Threshold |
|
|
|
Fragmentation | It is the maximum data fragment size that can be sent. Enter a value between 256 |
Threshold | and 2432. |
|
|
802.11 Mode | Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate |
| with the ZyXEL Device. |
| Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate |
| with the ZyXEL Device. |
| Select 802.11b/g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN |
| devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL |
| Device might be reduced. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to reload the previous configuration for this screen. |
|
|
| 99 |
|
|