Chapter 10 Phone
10.3.1.1 DECT Base Station Reset
Resetting the DECT base station erases all the details of the DECT phones registered with the ZyXEL Device. You can do this to clear the DECT base station memory of the DECT phones no longer used with the ZyXEL Device, for example if one of your DECT phones is lost.
When you reset the DECT base station, you will need to
"Resetting the DECT base station does not reset the PIN you use for registering DECT phones. You must use the last PIN you configured to register or re- register your DECT phones.
Press the DECT base station button (refer to Figure 85 on page 154) for 12 seconds or more to reset the DECT base station.
10.3.2Using your DECT PhoneYou can use your DECT phone to make calls to other DECT phones registered with the ZyXEL Device (A). These calls are referred to as internal calls.
You can also use your DECT phone to make VoIP calls (B). For the PSTN models, you can also make calls via the PSTN line (C). These types of calls are referred to as external calls.
Figure 87 Using Your DECT Phone
A
C
B 
The following table summarizes the types and number of calls you can make with your DECT phones via the ZyXEL Device.
Table 69 DECT Phone Calls Summary
TYPE OF CALL | DESCRIPTION | LIMITS |
Internal | A call between two DECT phones | Two calls. |
| registered with the ZyXEL Device |
|
| DECT base station. |
|
|
|
|
External | A call from the DECT phone to or | Two calls. |
| from a VoIP or a PSTN caller. |
|
|
|
|
| 155 |
|
|