Chapter 14 Firewall
Figure 114 IP Alias
14.3 Firewall Screens
14.3.1 General Firewall Screen
Use this screen to configure the basic settings for your firewall. To access this screen, click Security > Firewall > General.
Figure 115 Security > Firewall > General
Each field is described in the following table.
Table 86 Security > Firewall > General
LABEL | DESCRIPTION |
Enable Firewall | Select this to activate the firewall. The ZyXEL Device controls access and protects |
| against Denial of Service (DoS) attacks when the firewall is activated. |
|
|
Bypass Triangle | Select this if you want to let some traffic from the WAN go directly to a computer in |
Route | the LAN without passing through the ZyXEL Device. See the appendices for more |
| information about triangle route topology. |
|
|
Max NAT/Firewall | Select the maximum number of NAT rules and firewall rules the ZyXEL Device |
Session Per User | enforces at one time. The ZyXEL Device automatically allocates memory for the |
| maximum number of rules, regardless of whether or not there is a rule to enforce. |
| This is the same number you enter in Network > NAT > General. |
|
|
| 191 |
|
|