ZyXEL Communications P-2302HWUDL-P1 Series manual 51

	Chapter 3 Wizard Setup
Table 7 Wireless LAN Setup Wizard 2
LABEL	DESCRIPTION
Security	Select Auto(WPA-PSK with self-generated key), if you want OTIST to configure a
	WPA key for you.
	Select Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with
	customized key) to configure a Pre-Shared Key (WPA-PSK). Choose this option only
	if your wireless clients support WPA or WPA2. See Section 3.2.3.2 on page 51 for
	more information.
	Select Basic(WEP) to configure a WEP Key. See Section 3.2.3.3 on page 52 for more
	information.
	Select None to have no wireless LAN security configured and your network is
	accessible to any wireless networking device that is within range.
Back	Click Back to display the previous screen.
Next	Click Next to proceed to the next screen.
Exit	Click Exit to close the wizard screen without saving.

3.2.3.2 Manually Assign a WPA or WPA2 key

Choose Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with customized key) in the Wireless LAN setup screen to set up a Pre-Shared Key.

Figure 16 Manually Assign a WPA/WPA2 key

The following table describes the labels in this screen.

Table 8 Manually Assign a WPA or WPA2 key

LABEL	DESCRIPTION
Pre-Shared	Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
Key	wireless connection by configuring WPA in the wireless LAN screens. You need to
	configure an authentication server to do this.
Back	Click Back to display the previous screen.
Next	Click Next to proceed to the next screen.
Exit	Click Exit to close the wizard screen without saving.

	51
P-2302HWUDL-P1 Series User’s Guide