Chapter 3 Wizard Setup
3.3.1 SIP SettingsFigure 27 VoIP Setup Wizard > SIP Settings
The following table describes the labels in this screen.
Table 19 VoIP Setup Wizard > SIP Settings
LABEL | DESCRIPTION |
SIP1 (- SIP10) | Use this screen to configure SIP settings for up to 10 SIP accounts. |
Settings |
|
|
|
SIP Number | Enter your SIP number. In the full SIP URI (like |
| is the part before the @ symbol. You can use up to 127 printable ASCII |
| characters. |
|
|
SIP Server | Enter the IP address or domain name of the SIP server provided by your VoIP |
Address | service provider. You can use up to 95 printable ASCII characters. It does not |
| matter whether the SIP server is a proxy, redirect or register server. |
|
|
SIP Service | Enter the SIP service domain name. In the full SIP URI (like 1234@VoIP- |
Domain | provider.com), this is the part after the @ symbol. You can use up to 127 printable |
| ASCII Extended set characters. |
|
|
Authentication |
|
|
|
User Name | Enter the user name for registering this SIP account, exactly as it was given to |
| you. You can use up to 95 printable ASCII characters. |
|
|
Password | Enter the user name for registering this SIP account, exactly as it was given to |
| you. You can use up to 95 printable ASCII Extended set characters. |
|
|
Check here to set | Select this if you want to set up additional SIP accounts. |
up SIP settings |
|
|
|
62 |
| |
| ||
|
|
|