Appendix F Internal SPTGEN

"DO NOT alter or delete any field except parameters in the Input column.

This appendix introduces Internal SPTGEN. All menus shown in this appendix are example menus meant to show SPTGEN usage. Actual menus for your product may differ.

Internal SPTGEN File Modification - Important Points to Remember

Each parameter you enter must be preceded by one “=”sign and one space.

Some parameters are dependent on others. For example, if you disable the Configured field in menu 1 (see Figure 235 on page 331), then you disable every field in this menu.

If you enter a parameter that is invalid in the Input column, the ZyXEL Device will not save the configuration and the command line will display the Field Identification Number. Figure 236 on page 332, shown next, is an example of what the ZyXEL Device displays if you enter a value other than “0” or “1” in the Input column of Field Identification Number 1000000 (refer to Figure 235 on page 331).

Figure 236 Invalid Parameter Entered: Command Line Example

field value is not legal error:-1

ROM-t is not saved, error Line ID:10000000 reboot to get the original configuration Bootbase Version: V2.02 2/22/2001 13:33:11 RAM: Size = 8192 Kbytes

FLASH: Intel 8M *2

The ZyXEL Device will display the following if you enter parameter(s) that are valid.

Figure 237 Valid Parameter Entered: Command Line Example

Please wait for the system to write SPT text file(ROM-t)...

Bootbase Version: V2.02 2/22/2001 13:33:11

RAM: Size = 8192 Kbytes

FLASH: Intel 8M *2

Internal SPTGEN FTP Download Example

1Launch your FTP application.

2Enter "bin". The command “bin” sets the transfer mode to binary.

3Get "rom-t" file. The command “get” transfers files from the ZyXEL Device to your computer. The name “rom-t” is the configuration filename on the ZyXEL Device.

4Edit the "rom-t" file using a text editor (do not use a word processor). You must leave this FTP screen to edit.

332

 

P-2302HWUDL-P1 Series User’s Guide