Chapter 4 Status Screens
Table 30 VoIP Statistics Window
LABEL | DESCRIPTION |
Status | This field displays the current status of each call. |
| DIAL - The ZyXEL Device is dialing the current call. |
| RING - The phone is ringing because there is an incoming call. |
| Process - The call is connected and in process. |
| DROP - The ZyXEL Device is hanging up (disconnecting) the current call. |
| DISC - The ZyXEL Device has hung up. |
| N/A - There is no phone connected to this phone port. |
|
|
Codec | This field displays the type of voice compression used in the current call. |
|
|
Peer Number | If the current call is a |
| other party. Otherwise, it displays N/A. |
|
|
Duration | This field displays how long the current call has lasted. |
|
|
Tx Pkts | This field displays the number of packets the ZyXEL Device has transmitted in the |
| current call. |
|
|
Rx Pkts | This field displays the number of packets the ZyXEL Device has received in the |
| current call. |
|
|
Tx B/s | This field displays how quickly the ZyXEL Device has transmitted packets in the |
| current call. The rate is the number of kilobits transmitted one second before the |
| last time the screen updated (refreshed). |
|
|
Rx B/s | This field displays how quickly the ZyXEL Device has received packets in the |
| current call. The rate is the number of kilobits received one second before the last |
| time the screen updated (refreshed). |
|
|
Poll Interval | Enter how often you want the ZyXEL Device to update this screen, and click Set |
| Interval. |
|
|
Set Interval | Click this to make the ZyXEL Device update the screen based on the amount of |
| time you specified in Poll Interval. |
|
|
Stop | Click this to make the ZyXEL Device stop updating the screen. |
|
|
4.5 BW MGMT Monitor Window
To access this screen, open the Status screen (see Section 4.1 on page 71), and click (Details
...) next to BW MGMT Monitor.
| 77 |
|
|