Chapter 5 Wireless LAN
"You must click Start in the ZyXEL Device and in the wireless device(s) within three minutes of each other. You can start OTIST in the wireless devices and the ZyXEL Device in any order.
After you click Start in the ZyXEL Device, the following screen appears (in the ZyXEL Device).
Figure 50 OTIST: Settings
You can use the key in this screen to set up
Review the settings, and click OK. The ZyXEL Device begins transferring OTIST settings. The following is an example screen that appears in the wireless devices.
Figure 51 OTIST: In Progress on the Wireless Device
This screen closes when the transfer is complete.
5.5.1Notes on OTIST1If you enable OTIST in a wireless device, you see this screen each time you start the utility. Click Yes to search for an
96 |
| |
| ||
|
|
|