Prestige 324 Intelligent Broadband Sharing Gateway

Table 9-1 Fields in Menu 11.1 (Ethernet Encapsulation)

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Service Name

This is valid only when you have chosen PPPoE encapsulation. If you are

poellc

 

using PPPoE encapsulation, then type the name of your PPPoE service

 

 

here.

 

 

 

 

Outgoing

 

 

 

 

 

My Login

This field is applicable for PPPoE encapsulation only. Enter the login

jim

 

name assigned by your ISP when the Prestige calls this remote node.

 

 

Some ISPs append this field to the Service Name field above (e.g.,

 

 

jim@poellc) to access the PPPoE server.

 

My Password

Enter the password assigned by your ISP when the Prestige calls this

*****

 

remote node. Valid for PPPoE encapsulation only.

 

Server IP

This field is valid for RoadRunner service type only. The Prestige will find

 

 

the RoadRunner Server IP automatically if this field is left blank. If it does

 

 

not, then you must enter the authentication server IP address here.

 

 

 

 

Route

This field refers to the protocol that will be routed by your Prestige – IP is

IP

 

the only option for the Prestige 10.

 

 

 

 

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes

Yes

 

and press [ENTER] to go to Menu 11.3 - Remote Node Network Layer

 

 

Options.

 

Session

This field leads to another “hidden” menu. Use the [SPACE BAR] to select

Yes

Options

Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See the

 

Edit Filter

Remote Node Filter section for more details.

 

 

 

sets

 

 

 

 

 

Once you have configured the Remote Node Profile Menu, press [ENTER] to return to menu 11. Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time to cancel.

9.2.2 PPTP Encapsulation

If you change the Encapsulation to PPTP in Menu 11.1, then you will see the next screen. Please see the appendix for information.

Remote Node Setup

9-3