ZyXEL Communications P-324 Table 18-3Time and Date Setting Fields, Figure 18-7Menu 24.10 System Maintenance — Time and Date Setting

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= NTP (RFC-1305)

Time Server Address= time-b.nist.gov

Current Time:	00	: 17		:	12
New Time (hh:mm:ss):	00	: 17		:	10
Current Date:	2000		- 01		- 01
New Date (yyyy-mm-dd):	2000		- 01		- 01
Time Zone= GMT
Daylight Saving= No				01	- 01
Start Date (mm-dd):
End Date (mm-dd):				01	- 01

Press ENTER to Confirm or ESC to Cancel:

Figure 18-7 Menu 24.10 System Maintenance — Time and Date Setting

		Table 18-3 Time and Date Setting Fields
	FIELD	DESCRIPTION
	Use Time Server	Enter the time service protocol that your time server sends when you turn on the
	when Bootup	Prestige. Not all time servers support all protocols, so you may have to check with
		your ISP/network administrator or use trial and error to find a protocol that works.
		The main differences between them are the format.
		Daytime (RFC 867) format is day/month/year/time zone of the server.
		Time (RFC-868)format displays a 4-byte integer giving the total number of
		seconds since 1970/1/1 at 0:0:0.
		NTP (RFC-1305) is similar to Time (RFC-868).
		None is the default value. Enter the time manually. Each time you turn on the
		Prestige, the time and date will be reset to 2000-1-1 0:0:0.
	Time Server IP	Enter the IP address of your time server or its domain name (if your time server is
	Address	using DNS). Check with your ISP/network administrator if you are unsure of this
		information.
	Current Time	This field displays an updated time only when you reenter this menu.
	New Time	Enter the new time in hour, minute and second format.
	Current Date	This field displays an updated date only when you reenter this menu.
	New Date	Enter the new date in year, month and day format.
18-6		System Maintenance & Information