Table 2-1Prestige Rear Panel Connections

 

 

 

 

CONNECTION

 

DESCRIPTION AND FUNCTION

 

 

Power 9V AC

Connect the included power adaptor to the power supply and connect the other end of

 

the power adaptor cable to this socket.

 

 

 

 

 

Do this step last. Use only the included power adapter!

 

 

 

See the Power Adapter Specification Appendix for regional

 

 

specifications.

 

 

 

Power 9V AC

Connect the end of the included power adaptor (use only this adapter) to this power

 

socket.

 

 

 

 

 

Use only the included power adapter! See the Power Adapter

 

 

 

Specification Appendix for regional specifications.

 

 

 

CON/AUX

Set this switch to the “CON” side to use the CON/AUX port as a regular console port for

switch

local device configuration and management. Connect the 9-pin male end of the console

CON/AUX port

cable to the console port of the Prestige and the other end (choice of 9-pin or 25-pin,

 

depending on your computer) end to a serial port (COM1, COM2 or other COM port) of

 

your computer. You can use an extension RS-232 cable if the enclosed one is too short.

 

Your computer should have a terminal emulation communications program (such as

 

HyperTerminal) set to VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no data

 

flow and 9600 bps port speed.

 

Set this switch to the “AUX” side to use the CON/AUX port as an auxiliary dial-up WAN

 

connection. Connect the 9-pin male end of the RS-232 Y-cable to the CON/AUX port and

 

use the included CON/AUX converter on the other 9-pin end of the cable to connect to a

 

modem or TA.

 

 

 

 

2-2

Hardware Installation & Initial Setup