ZyXEL Communications P-324 13.5.2 Remote Node Filters, protocol filters, protocol filters, Call Filter Sets, Output Filter Sets, Figure 13-15Filtering Remote Node Traffic

13.5.2 Remote Node Filters

Go to menu 11.5 (shown next – note that call filter sets are only present for PPPoE encapsulation) and enter the number(s) of the filter set(s) as appropriate. You can cascade up to four filter sets by entering their numbers separated by commas. Enter 1 in protocol filters under Output Filter Sets when using Ethernet encapsulation, and in the protocol filters field under Call Filter Sets when using PPPoE or PPTP encapsulation. Apply them as shown in the following figure.

Menu 11.5 - Remote Node Filter
Input Filter Sets:
	Apply
protocol filters=
device filters=	factory
Output Filter Sets:
protocol filters=	default
device filters=	Filters
Call Filter Sets:
protocol filters=	here.
device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 13-15 Filtering Remote Node Traffic

13-18 Filter Configuration