ZyXEL Communications P-324 manual 129

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start=

End = N/A

Global IP:

Start=

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 11-9 Menu 15.1.1.1 — Editing/Configuring an Individual Rule in a Set Table 11-6 Menu 15.1.1.1 — Editing/Configuring an Individual Rule in a Set

FIELD	DESCRIPTION	EXAMPLE
Type	Press the [SPACE BAR] to select one of five types. These are the mapping	One-to-One
	types discussed in Table 11-2. Server allows you to specify multiple
	servers of different types behind NAT to this computer. See section 11.4.3
	below for an example.
Type	Press the [SPACE BAR] to select one of five types. These are the mapping	One-to-One
	types discussed in Table 11-2. Server allows you to specify multiple
	servers of different types behind NAT to this computer. See section 11.4.3
	below for an example.
Local IP	Only local IP fields are N/A for server; Global IP fields MUST be set for
	Server.
Start	This is the starting local IP address (ILA).	0.0.0.0
End	This is the ending local IP address (ILA). If the rule is for all local IPs, then	N/A
	put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is
	N/A for One-to-One and Server types.
Global IP
Start	This is the starting global IP address (IGA). If you have a dynamic IP, enter	0.0.0.0
	0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to
	0.0.0.0 only if the types are Many-to-Oneor Server.
End	This is the ending global IP address (IGA). This field is N/A for One-to-	N/A
	One, Many-to-One and Server types.
11-14		NAT