ZyXEL Communications P-324 Ordering Your Rules, Table 11-5Fields in Menu, Figure 11-8Menu 15.1.1 — First Set, (described later) and the values are displayed here

Menu 15.1.1 - Address Mapping Rules

Set	Name=	?
Idx	Local	Start IP Local End IP Global Start IP Global End IP Type

--- --------------- --------------- --------------- --------------- ------

1.

2

3.

4.

5.

6.

7.

8.

9.

10.

Action= None Select Rule= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 11-8 Menu 15.1.1 — First Set

The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1

(described later) and the values are displayed here.

Ordering Your Rules

Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.

Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6 becomes rule 5 and old rule 7 becomes rule 6.

Table 11-5 Fields in Menu 15.1.1

FIELD	DESCRIPTION	EXAMPLE
Set Name	Enter a name for this set of rules. This is a required field. If this	NAT_SET
	field is left blank, the entire set will be deleted.

11-12 NAT