Prestige 324 Intelligent Broadband Sharing Gateway

Table 9-3 Fields in Menu 11.1 (PPPoE Encapsulation Specific Only)

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Schedules

You can apply up to four schedule sets here. For more details

 

 

please refer to the Call Scheduling chapter.

 

Nailed-Up

This field specifies if you want to make the connection to this

 

Connection

remote node a nailed-up connection. More details are given

 

 

earlier in this section.

 

Session Options

This value specifies the idle time (i.e., the length of time there is

300 seconds

Idle Timeout

no traffic from the Prestige to the remote node) in seconds that

(default)

can elapse before the Prestige automatically disconnects the

 

 

 

 

PPPoE connection. This option only applies when the Prestige

 

 

initiates the call.

 

 

 

 

9.3Edit IP Remote Node Network Layer Options

Move the cursor to the Edit IP field in Menu 11.1, then press the [SPACE BAR] to set the value to Yes. Press [ENTER] to open Menu 11.3 - Remote Node - Network Layer Options.

This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP Addr field for Ethernet encapsulation.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

Rem IP Address= N/A

Rem IP Subnet Mask= N/A

My WAN Addr=0.0.0.0

Network Address Translation= SUA only

Metric= 1

Private= No

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 9-4 Remote Node Network Layer Options

The next table gives you instructions about configuring remote node network layer options.

Remote Node Setup

9-7