ZyXEL Communications P-324 Step, Step, Step, Step, Step, Figure 17-7Telnet into Menu, Step 14. Launch the FTP client on your computer

Menu 24.6 -- System Maintenance - Restore Configuration

To transfer the firmware and configuration file to your workstation, follow the procedure below:

1.Launch the FTP client on your workstation.

2.Type "open" and the IP address of your router. Then type "root" and SMT password as requested.

3.Type "put backupfilename rom-0" where backupfilename is the name of your backup configuration file on your workstation and rom-spt is the remote file name on the router. This restores the configuration to your router.

4.The system reboots automatically after a successful file transfer

For details on FTP commands, please consult the documentation of your FTP client program. For details on backup using TFTP (note that you must remain in this menu to back up using TFTP), please see your router manual.

Press ENTER to Exit:

Figure 17-7 Telnet into Menu 24.6Step 14. Launch the FTP client on your computer.

Step 15. Enter “open”, followed by a space and the IP address of your Prestige. Step 16. Press [ENTER] when prompted for a username.

Step 17. Enter your password as requested (the default is “1234”).Step 18. Enter “bin” to set transfer mode to binary.

Step 19. Find the “rom” file (on your computer) that you want to restore to your Prestige.

Step 20. Use “put” to transfer files from the Prestige to the computer, for example, “put config.rom rom- 0” transfers the configuration file on the Prestige to your computer and renames it “config.rom”. See earlier in this chapter for more information on filename conventions.

Step 21. Enter “quit” to exit the ftp prompt. The Prestige will automatically restart after a successful restore process.

Firmware and Configuration Maintenance 17-9