Step 4. Select Type as One-to-One(direct mapping for packets going both ways), and enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1 (our first IGA). (See Figure 11-19).

Step 5. Repeat the previous step for rules 2 to 4 as outlined above.

Step 6. When finished, menu 15.1.1 should look like as shown in Figure 11-20.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= Full Feature

Metric= 1

Private= No

RIP Direction= None

Version= N/A

Enter here to CONFIRM or ESC to CANCEL:

Figure 11-18 Example 3: Menu 11.3

The following figure shows how to configure the first rule.

11-24

NAT