ZyXEL Communications P-324 Table 9-2Fields in Menu 11.1 (PPTP Encapsulation), Figure 9-2Remote Node Profile for PPTP Encapsulation

				Menu 11.1 - Remote Node Profile
		Rem Node Name= ChangeMe			Route= IP
		Active= Yes
		Encapsulation= PPTP			Edit IP= No
		Service Type= Standard			Telco Option:
		Service Name=N/A			Allocated Budget(min)= 0
		Outgoing:			Period(hr)= 0
		My Login=			Schedules=
		My Password= ********			Nailed-up Connections= No
		Authen= CHAP/PAP
		PPTP :			Session Options:
		IP Addr=			Edit Filter Sets= No
		Server IP Addr=			Idle Timeout(sec)= 300
		Connection ID/Name=			Edit Traffic Redirect= No
				Press ENTER to Confirm or ESC to Cancel:
		Press Space Bar to Toggle.
			Figure 9-2 Remote Node Profile for PPTP Encapsulation
				Table 9-2 Fields in Menu 11.1 (PPTP Encapsulation)
		FIELD			DESCRIPTION	EXAMPLE
Encapsulation				Press the [SPACE BAR] to choose PPTP. You must also go to		PPTP
				menu 11.3 to check the IP Address setting once you have
				selected the encapsulation method.
		My IP Addr		Enter the IP address of the WAN Ethernet port.		10.0.0.140
	Server IP Addr			Enter the IP address of the ANT modem.		10.0.0.138
		Connection		Enter the connection ID or connection name in the ANT. It must		N:My ISP
		ID/Name		follow the “c:id” and “n:name” format.
				This field is optional and depends on the requirements of your
				xDSL Modem.
Schedules				You can apply up to four schedule sets here. For more details
				please refer to the Call Schedule Scheduling chapter.
Nailed-Up				Use the [SPACE BAR] to select Yes if you want to make the		No
Connections				connection to this remote node a nailed-up connection.

9-4 Remote Node Setup