Prestige 324 Broadband Sharing Gateway with 4-Port Switch

procedures for Windows users.

One of the benefits of PPPoE is the ability to let end users access one of multiple network services, a function known as dynamic service selection. This enables the service provider to easily create and offer new IP services for specific users.

Operationally, PPPoE saves significant effort for both the end user and ISP/carrier, as it requires no specific configuration of the broadband modem at the customer site.

By implementing PPPoE directly on the Prestige (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the Prestige does that part of the task. Furthermore, with NAT, all of the LAN’s computers will have access.

If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE, please refer to the PPPoE Appendix.

 

 

 

Menu 4 - Internet Access Setup

 

 

 

 

 

 

 

 

 

ISP's Name= myISP

 

 

 

 

 

Encapsulation= PPPoE

 

 

 

 

 

Service Type= N/A

 

 

 

 

 

My Login=

 

 

 

 

 

My Password= ********

 

 

 

 

 

Idle Timeout= 300

 

 

 

 

 

IP Address Assignment= Dynamic

 

 

 

 

 

IP Address= N/A

 

 

 

 

 

IP Subnet Mask= N/A

 

 

 

 

 

Gateway IP Address= N/A

 

 

 

 

 

Network Address Translation = SUA Only

 

 

 

 

 

Press ENTER to Confirm or ESC to Cancel:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 8-3 Internet Access (PPPoE)

 

 

 

 

 

 

IP Static Route Setup

8-5Internet Access

 

 

 

8-5