Chapter 6 WAN Setup
6.3 The More Connections Screen
The ZyXEL Device allows you to configure more than one Internet access connection. To configure additional Internet access connections click Network > WAN > More Connections. The screen differs by the encapsulation you select. When you use the WAN > Internet Access Setup screen to set up Internet access, you are configuring the first WAN connection.
Figure 34 Network > WAN > More Connections
The following table describes the labels in this screen.
Table 21 Network > WAN > More Connections
LABEL | DESCRIPTION |
# | This is an index number indicating the number of the corresponding |
| connection. |
|
|
Active | This field indicates whether the connection is active or not. |
| Clear the check box to disable the connection. Select the check box to |
| enable it. |
|
|
Name | This is the name you gave to the Internet connection. |
|
|
VPI/VCI | This field displays the Virtual Path Identifier (VPI) and Virtual Channel |
| Identifier (VCI) numbers configured for this WAN connection. |
|
|
Encapsulation | This field indicates the encapsulation method of the Internet connection. |
|
|
Modify | The first (ISP) connection is |
| Internet Access Setup screen to edit it. |
| Click the Edit icon to edit the Internet connection settings. Click this icon |
| on an empty configuration to add a new Internet access setup. |
| Click the Remove icon to delete the Internet access setup from your |
| connection list. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
| 107 |
|
|