Chapter 1 Introducing the ZyXEL Device

1.7.1 Turn the Wireless LAN Off or On

1Make sure the POWER LED is on (not blinking).

2Press the WPS WLAN ON/OFF button for less than five seconds and release it. The WLAN/WPS LED should change from on to off or vice versa.

1.7.2Activate WPS

1Make sure the POWER LED is on (not blinking).

2Press the WPS WLAN ON/OFF button for five to ten seconds and release it. Press the WPS button on another WPS-enabled device within range of the ZyXEL Device. The WLAN/WPS LED should flash while the ZyXEL Device sets up a WPS connection with the wireless device.

Note: You must activate WPS in the ZyXEL Device and in another wireless device within two minutes of each other. See Section 8.8.8 on page 163 for more information.

28

 

P-660HW-Tx v3 Series User’s Guide