Chapter 4 Tutorials
•Adding a Firewall Rule for Remote Management
Note: If you have a private WAN IP address, then you cannot use DDNS.
4.6.1 Registering a DDNS Account on www.dyndns.org
1Open a browser and type http://www.dyndns.org.
2Apply for a user account. This tutorial uses UserName1 and 12345 as the username and password.
3Log into www.dyndns.org using your account.
4Add a new DDNS host name. This tutorial uses the following settings as an example.
•Hostname: zyxelrouter.dyndns.org
•Service Type: Host with IP address
•IP Address: Enter the WAN IP address that your ZyXEL Device is currently using. You can find the IP address on the ZyXEL Device’s Web Configurator Status page.
Then you will need to configure the same account and host name on the ZyXEL Device later.
4.6.2 Configuring DDNS on Your ZyXEL Device
1Log into the ZyXEL Device's advanced mode.
2Configure the following settings in the Advanced > Dynamic DNS screen.
2a Select Active Dynamic DNS.
2b Select Dynamic DNS for the DDNS type.
2c Type zyxelrouter.dyndns.org in the Host Name field.
2d Enter the user name (UserName1) and password (12345).
62 |
| |
| ||
|
|
|