Chapter 4 Tutorials
3The ZyXEL Device’s login page should appear. You can then log into the ZyXEL Device and manage it.
4.7Configuring Static Route for Routing to Another Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the ZyXEL Device’s LAN. The router may be used to separate two department networks. This tutorial shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the ZyXEL Device’s LAN. R connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the ZyXEL Device’s WAN default gateway by default. In this case, B will never receive the traffic.
N1
A
R
N2
B
| 65 |
|
|