Chapter 25 Product Specifications
Table 116 Firmware Specifications (continued)
Default User | user | |
Password |
| |
|
| |
Default Admin | 1234 | |
Password |
| |
|
| |
DHCP Server IP Pool | 192.168.1.32 to 192.168.1.64 | |
|
| |
Static DHCP | 10 | |
Addresses |
| |
|
| |
Content Filtering | Web page blocking by URL keyword. | |
|
| |
Static Routes | 16 | |
|
| |
Device Management | Use the web configurator to easily configure the rich range of | |
| features on the ZyXEL Device. | |
|
| |
Wireless | Allow the IEEE 802.11b and/or IEEE 802.11g wireless clients to | |
Functionality | connect to the ZyXEL Device wirelessly. Enable wireless security | |
(wireless devices | (WEP, WPA(2), | |
wireless network. | ||
only) | ||
| ||
|
| |
Firmware Upgrade | Download new firmware (when available) from the ZyXEL web site | |
| and use the web configurator, an FTP or a TFTP tool to put it on | |
| the ZyXEL Device. |
| Note: Only upload firmware for your specific model! |
|
|
Configuration Backup | Make a copy of the ZyXEL Device’s configuration. You can put it |
& Restoration | back on the ZyXEL Device later if you decide to revert back to an |
| earlier configuration. |
|
|
Network Address | Each computer on your network must have its own unique IP |
Translation (NAT) | address. Use NAT to convert your public IP address(es) to multiple |
| private IP addresses for the computers on your network. |
|
|
Port Forwarding | If you have a server (mail or web server for example) on your |
| network, you can use this feature to let people access it from the |
| Internet. |
|
|
DHCP (Dynamic Host | Use this feature to have the ZyXEL Device assign IP addresses, an |
Configuration | IP default gateway and DNS servers to computers on your |
Protocol) | network. Your device can also act as a surrogate DHCP server |
| (DHCP Relay) where it relays IP address assignment from the |
| actual real DHCP server to the clients. |
|
|
Dynamic DNS | With Dynamic DNS (Domain Name System) support, you can use |
Support | a fixed URL, www.zyxel.com for example, with a dynamic IP |
| address. You must register for this service with a Dynamic DNS |
| service provider. |
|
|
IP Multicast | IP multicast is used to send traffic to a specific group of |
| computers. The ZyXEL Device supports versions 1 and 2 of IGMP |
| (Internet Group Management Protocol) used to join multicast |
| groups (see RFC 2236). |
|
|
Time and Date | Get the current time and date from an external server when you |
| turn on your ZyXEL Device. You can also set the time manually. |
| These dates and times are then used in logs. |
|
|
Logs | Use logs for troubleshooting. You can send logs from the ZyXEL |
| Device to an external syslog server. |
342 |
| |
| ||
|
|
|