Chapter 15 802.1Q/1P
15.1.3 802.1Q/1P Example
This example shows how to configure the 802.1Q/1P settings on the ZyXEL Device.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
| 1 |
|
| VoIP Network | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 |
|
| |||
2 |
|
|
|
|
| Internet - (PPPoE) | |
3 |
| ||||||
|
|
|
|
|
|
| |
|
|
| 4 |
|
| Internet - (PPPoE) | |
3 |
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
| 5 |
|
|
| |
|
|
|
|
| |||
|
|
|
|
|
|
| |
4 | 6 |
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
| 7 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| 8 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LAN1 and LAN2 are connected to ATAs (Analogue Telephone Adapters) and used for VoIP traffic. You want to create high priority for this type of traffic, so you want to group these ports into one VLAN (VLAN2) and then to a PVC (PVC1) where the priority is set to high level of service.
You would start with the following steps.
1Click Advanced > 802.1Q/1P > Group Setting, and then click the Edit button to display the following screen.
2In the Name field type VoIP to identify the group.
3In the VLAN ID field type in 2 to identify the VLAN group.
4Select PVC1 from the Default Gateway
5In the Control field, select Fixed for LAN1, LAN2 and PVC1 to be permanent members of the VLAN group.
| 245 |
|
|