|
| Chapter 16 Quality of Service (QoS) | |
| Table 76 Advanced > QoS > Class Setup: Edit (continued) | ||
| LABEL | DESCRIPTION |
|
| 802.1Q Tag | Select Same to keep the priority setting and VLAN ID of the frames. |
|
|
| Select Auto to map the 802.1 priority level to the DSCP value |
|
|
| automatically. |
|
|
| Select Remove to delete the priority queue tag and VLAN ID of the |
|
|
| frames. |
|
|
| Select Mark to replace the 802.1 priority field and VLAN ID with the |
|
|
| value you set in the fields below. |
|
|
| Select Add to treat all matched traffic untagged and add a second |
|
|
| priority queue tag and VLAN. |
|
|
|
|
|
| Ethernet | Select a priority level (between 0 and 7) from the drop down list box. |
|
| Priority |
|
|
|
|
|
|
| VLAN ID | Specify a VLAN ID number between 2 and 4094. |
|
|
|
|
|
| Filter | Use the following fields to configure the criteria for traffic |
|
| Configuration | classification. |
|
|
|
|
|
| Source |
|
|
|
|
|
|
| Address | Select the check box and enter the source IP address in dotted |
|
|
| decimal notation. A blank source IP address means any source IP |
|
|
| address. |
|
|
|
|
|
| Subnet | Enter the source subnet mask. Refer to the appendix for more |
|
| Netmask | information on IP subnetting. |
|
|
|
|
|
| Port | Select the check box and enter the port number of the source. 0 |
|
|
| means any source port number. See Appendix E on page 411 for some |
|
|
| common services and port numbers. |
|
|
|
|
|
| MAC | Select the check box and enter the source MAC address of the packet. |
|
|
|
|
|
| MAC Mask | Type the mask for the specified MAC address to determine which bits |
|
|
| a packet’s MAC address should match. |
|
|
| Enter “f” for each bit of the specified source MAC address that the |
|
|
| traffic’s MAC address should match. Enter “0“ for the bit(s) of the |
|
|
| matched traffic’s MAC address, which can be of any hexadecimal |
|
|
| character(s). For example, if you set the MAC address to |
|
|
| 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a |
|
|
| MAC address of 00:13:49:12:34:56 matches this criteria. |
|
|
|
|
|
| Exclude | Select this option to exclude the packets that match the specified |
|
|
| criteria from this classifier. |
|
|
|
|
|
| Destination |
|
|
|
|
|
|
| Address | Select the check box and enter the destination IP address in dotted |
|
|
| decimal notation. |
|
|
|
|
|
| Subnet | Enter the destination subnet mask. Refer to the appendix for more |
|
| Netmask | information on IP subnetting. |
|
|
|
|
|
| Port | Select the check box and enter the port number of the destination.0 |
|
|
| means any source port number. See Appendix E on page 411 for some |
|
|
| common services and port numbers. |
|
|
|
|
|
| MAC | Select the check box and enter the destination MAC address of the |
|
|
| packet. |
|
|
|
|
|
| 263 |
|
|