
Chapter 7 LAN Setup
7.5.1 Configuring the LAN IP Alias Screen
Use this screen to change your ZyXEL Device’s IP alias settings. Click Network > LAN > IP Alias to open the following screen.
Figure 43 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 28 Network > LAN > IP Alias
LABEL | DESCRIPTION |
IP Alias 1, 2 | Select the check box to configure another LAN network for the ZyXEL |
| Device. |
|
|
IP Address | Enter the IP address of your ZyXEL Device in dotted decimal notation. |
| Alternatively, click the right mouse button to copy and/or paste the IP |
| address. |
|
|
IP Subnet Mask | Your ZyXEL Device will automatically calculate the subnet mask based |
| on the IP address that you assign. Unless you are implementing |
| subnetting, use the subnet mask computed by the ZyXEL Device. |
|
|
RIP Direction | RIP (Routing Information Protocol, RFC 1058 and RFC 1389) allows a |
| router to exchange routing information with other routers. The RIP |
| Direction field controls the sending and receiving of RIP packets. |
| Select the RIP direction from Both/In Only/Out Only/None. When |
| set to Both or Out Only, the ZyXEL Device will broadcast its routing |
| table periodically. When set to Both or In Only, it will incorporate the |
| RIP information that it receives; when set to None, it will not send any |
| RIP packets and will ignore any RIP packets received. |
|
|
128 |
| |
| ||
|
|
|