Chapter 8 Wireless LAN
8.4 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Set up each WPS connection between two devices. Both devices must support WPS.
Click Network > Wireless LAN > WPS. The following screen displays.
Figure 55 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 38 Network > Wireless LAN > WPS
LABEL | DESCRIPTION |
WPS Setup |
|
|
|
Enable WPS | Select the check box to activate WPS on the ZyXEL Device. |
|
|
PIN Number | This shows the PIN (Personal Identification Number) of the ZyXEL |
| Device. Enter this PIN in the configuration utility of the device you want |
| to connect to using WPS. |
| The PIN is not necessary when you use WPS |
|
|
Generate | Click this to have the ZyXEL Device create a new PIN. |
|
|
WPS Status | This displays Configured when the ZyXEL Device has connected to a |
| wireless network using WPS or Enable WPS is selected and wireless or |
| wireless security settings have been changed. The current wireless and |
| wireless security settings also appear in the screen. |
| This displays Unconfigured if WPS is disabled and there is no wireless |
| or wireless security changes on the ZyXEL Device or you click |
| Release_Configuration to remove the configured wireless and |
| wireless security settings. |
|
|
| 151 |
|
|