Chapter 4 Tutorials
4Configure the Static Route Setup screen using the following settings:
4a Select Active.
4b Specify a descriptive name for this routing rule.
4c Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4d Select Gateway Address for the gateway type.
4e Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4a Click Apply.
Now B should be able to receive traffic from A. You may need to additionally configure B’s firewall settings to allow specific traffic to pass through.
4.8Multiple Public and Private IP Address Mappings
If your ISP gives you more than one static IP address for your Internet access, you can map each IP address for a specific service. This tutorial assumes you are given two static public IP addresses. You want to map them to two servers A and B.
A 
B
C
| 67 |
|
|