|
| Chapter 14 Static Route |
| Table 69 Advanced > Static Route | |
| LABEL | DESCRIPTION |
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
14.2.1 Static Route Edit
Use this screen to configure the required information for a static route. Select a static route index number and click Edit. The screen shown next appears.
Figure 102 Advanced > Static Route: Edit
The following table describes the labels in this screen.
Table 70 Advanced > Static Route: Edit
LABEL | DESCRIPTION |
Active | This field allows you to activate/deactivate this static route. |
|
|
Route Name | Enter the name of the IP static route. The text may consist of up to 9 |
| letters, numerals and any printable character found on a typical English |
| language keyboard. Leave this field blank to delete this static route. |
|
|
Destination IP | This parameter specifies the IP network address of the final destination. |
Address | Routing is always based on network number. If you need to specify a |
| route to a single host, use a subnet mask of 255.255.255.255 in the |
| subnet mask field to force the network number to be identical to the host |
| ID. |
|
|
IP Subnet | Enter the IP subnet mask here. |
Mask |
|
|
|
Gateway Type | Use either Gateway Address or Gateway Node to configure a static |
| route. |
|
|
| 241 |
|
|