Chapter 14 Static Route
14.2 The Static Route Screen
Use this screen to view the static route rules. Click Advanced > Static Route to open the Static Route screen.
Figure 101 Advanced > Static Route
The following table describes the labels in this screen.
Table 69 Advanced > Static Route
LABEL | DESCRIPTION |
# | This is the number of an individual static route. |
|
|
Active | This field indicates whether the rule is active or not. |
| Clear the check box to disable the rule. Select the check box to enable it. |
|
|
Name | This is the name that describes or identifies this route. |
|
|
Destination | This parameter specifies the IP network address of the final destination. |
| Routing is always based on network number. |
|
|
Gateway | This is the IP address of the gateway. The gateway is a router or switch |
| on the same network segment as the device's LAN or WAN port. The |
| gateway helps forward packets to their destinations. |
|
|
Subnet Mask | This parameter specifies the IP network subnet mask of the final |
| destination. |
|
|
Modify | Click the Edit icon to go to the screen where you can set up a static route |
| on the ZyXEL Device. |
| Click the Remove icon to remove a static route from the ZyXEL Device. A |
| window displays asking you to confirm that you want to delete the route. |
|
|
240 |
| |
| ||
|
|
|