|
| Chapter 8 Wireless LAN |
| Table 34 Network > Wireless LAN > AP: Advanced Setup | |
| LABEL | DESCRIPTION |
| 802.11 Mode | Select 802.11b Only to allow only IEEE 802.11b compliant WLAN |
|
| devices to associate with the ZyXEL Device. |
|
| Select 802.11g Only to allow only IEEE 802.11g compliant WLAN |
|
| devices to associate with the ZyXEL Device. |
|
| Select Mixed to allow either IEEE 802.11b or IEEE 802.11g compliant |
|
| WLAN devices to associate with the ZyXEL Device. The transmission rate |
|
| of your ZyXEL Device might be reduced. |
|
|
|
| Back | Click this to return to the previous screen without saving. |
|
|
|
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
8.2.6 MAC Filter
Use this screen to change your ZyXEL Device’s MAC filter settings. Click the Edit button in the AP screen. The screen appears as shown.
Figure 52 Network > Wireless LAN > AP: MAC Address Filter
| 147 |
|
|