Chapter 8 Wireless LAN
The following table describes the labels in this screen.
Table 29 Network > Wireless LAN > AP
LABEL |
| DESCRIPTION |
Wireless Setup |
| |
|
| |
Active |
| Click the check box to activate wireless LAN. |
Wireless LAN |
|
|
|
|
|
| Select this option to have the ZyXEL Device automatically scan for and | |
Channel |
| select a channel which is not used by another device. |
|
|
|
Channel |
| Set the operating frequency/channel depending on your particular region. |
Selection |
| Click the Scan button to list available channels and then select a channel |
|
| |
|
| from the |
|
|
|
Common Setup |
| |
|
| |
Network |
| The SSID (Service Set IDentity) identifies the service set with which a |
Name (SSID) |
| wireless device is associated. Wireless devices associating to the access |
|
| point (AP) must have the same SSID. Enter a descriptive name (up to 32 |
|
| printable |
|
| Note: If you are configuring the ZyXEL Device from a computer |
|
| connected to the wireless LAN and you change the ZyXEL |
|
| Device’s SSID or WEP settings, you will lose your wireless |
|
| connection when you press Apply to confirm. You must then |
|
| change the wireless settings of your computer to match the |
|
| ZyXEL Device’s new settings. |
|
|
|
Hide SSID |
| Select this check box to hide the SSID in the outgoing beacon frame so a |
|
| station cannot obtain the SSID through scanning using a site survey tool. |
|
|
|
Security |
| See the following sections for more details about this field. |
Mode |
|
|
|
|
|
MAC Filter |
| This shows whether the wireless devices with the MAC addresses listed are |
|
| allowed or denied to access the ZyXEL Device using this SSID. |
|
|
|
Edit |
| Click this to go to the MAC Filter screen to configure MAC filter settings. |
|
| See Section 8.2.6 on page 147 for more details. |
|
|
|
140 |
| |
| ||
|
|
|