|
| Chapter 8 Wireless LAN |
| Table 29 Network > Wireless LAN > AP | |
| LABEL | DESCRIPTION |
| QoS | This shows whether Quality of Service (QoS) is activated or the priority |
|
| level for wireless traffic with this SSID. Select a priority level from the |
|
| |
|
| and Low. |
|
| Select None to disable QoS. |
|
| Select Default to have the ZyXEL Device automatically give traffic a |
|
| priority level according to the ToS value in the IP header of packets it |
|
| sends. Wifi MultiMedia Quality of Service (WMM QoS) gives high priority to |
|
| voice and video, which makes them run more smoothly. |
|
| Highest - Typically used for voice or video that should be |
|
| High - Typically used for voice or video that can be |
|
| Middle - Typically used for applications that do not fit into another |
|
| priority. For example, Internet surfing. |
|
| Low - Typically used for |
|
| large file transfers and print jobs that should not affect other applications. |
|
|
|
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
| Advanced | Click this to display the Wireless Advanced Setup screen and edit more |
| Setup | details of your WLAN setup. See Section 8.2.5 on page 146 for more |
|
| details. |
|
|
|
8.2.1 No Security
In the Network > Wireless LAN > AP screen, select No Security from the Security Mode list to allow wireless devices to communicate with the ZyXEL Device without any data encryption or authentication.
Note: If you do not enable any wireless security on your ZyXEL Device, your network is accessible to any wireless networking device that is within range.
Figure 47 Network > Wireless LAN > AP: No Security
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN > AP: No Security
LABEL | DESCRIPTION |
Security | Choose No Security from the |
Mode |
|
|
|
| 141 |
|
|