ZyXEL Communications P-660HW-TX V3 21.2 The View Log Screen

Chapter 21 Logs

21.2 The View Log Screen

Use the View Log screen to see the logs for the categories that you selected in the Log Settings screen (see Section 21.3 on page 303). Click Maintenance > Logs to open the View Log screen.

Entries in red indicate alerts. The log wraps around and deletes the old entries after it fills. Click a column heading to sort the entries. A triangle indicates ascending or descending sort order.

Figure 126 Maintenance > Logs > View Log

The following table describes the fields in this screen.

Table 89 Maintenance > Logs > View Log

LABEL	DESCRIPTION
Display	The categories that you select in the Log Settings screen display in the
	drop-down list box.
	Select a category of logs to view; select All Logs to view logs from all of
	the log categories that you selected in the Log Settings page.
Email Log Now	Click this to send the log screen to the e-mail address specified in the
	Log Settings page (make sure that you have first filled in the E-mail
	Log Settings fields in Log Settings).
Refresh	Click this to renew the log screen.
Clear Log	Click this to delete all the logs.
#	This field is a sequential value and is not associated with a specific entry.
Time	This field displays the time the log was recorded.
Message	This field states the reason for the log.
Source	This field lists the source IP address and the port number of the incoming
	packet.

302
	P-660HW-Tx v3 Series User’s Guide