Chapter 3 Status Screens
Each field is described in the following table.
Table 4 Status Screen
LABEL | DESCRIPTION |
Refresh Interval | Select how often you want the ZyXEL Device to update this screen. |
|
|
Apply | Click this to update this screen immediately. |
|
|
Device Information | |
|
|
Host Name | This field displays the ZyXEL Device system name. It is used for |
| identification. You can change this in the Maintenance > System > |
| General screen’s System Name field. |
|
|
Model | This is the model name of your device. |
Number |
|
|
|
MAC | This is the MAC (Media Access Control) or Ethernet address unique to |
Address | your ZyXEL Device. |
|
|
ZyNOS | This is the current version of the firmware inside the device. It also |
Firmware | shows the date the firmware version was created. Click this to go to the |
Version | screen where you can change it. |
| |
|
|
DSL | This is the current version of the device’s DSL modem code. |
Firmware |
|
Version |
|
|
|
WAN |
|
Information |
|
|
|
DSL Mode | This is the DSL standard that your ZyXEL Device is using. |
|
|
IP Address | This is the current IP address of the ZyXEL Device in the WAN. Click this |
| to go to the screen where you can change it. |
|
|
IP Subnet | This is the current subnet mask in the WAN. |
Mask |
|
|
|
Default | This is the IP address of the default gateway, if applicable. |
Gateway |
|
|
|
VPI/VCI | This is the Virtual Path Identifier and Virtual Channel Identifier that you |
| entered in the wizard or WAN screen. |
|
|
LAN |
|
Information |
|
|
|
IP Address | This is the current IP address of the ZyXEL Device in the LAN. Click this |
| to go to the screen where you can change it. |
|
|
IP Subnet | This is the current subnet mask in the LAN. |
Mask |
|
|
|
DHCP | This field displays what DHCP services the ZyXEL Device is providing to |
| the LAN. Choices are: |
| Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP |
| addresses to other computers in the LAN. |
| Relay - The ZyXEL Device acts as a surrogate DHCP server and relays |
| DHCP requests and responses between the remote server and the |
| clients. |
| None - The ZyXEL Device is not providing any DHCP services to the |
| LAN. |
| Click this to go to the screen where you can change it. |
|
|
36 |
| |
| ||
|
|
|