Chapter 8 Wireless LAN
Table 33 Network > Wireless LAN > AP: WPA(2)
LABEL DESCRIPTION
Port Number Enter the port number of the external accounting server.
You need not change this value unless your network administrator instructs you to do so with additional information.
Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external accounting server and the ZyXEL Device.
The key must be the same on the external accounting server and your
ZyXEL Device. The key is not sent over the network.
8.2.5 Wireless LAN Advanced Setup
Use this screen to configure advanced wireless settings. Click the Advanced Setup button in the AP screen. The screen appears as shown.
See Section 8.8.2 on page 158 for detailed definitions of the terms listed in this screen.
Figure 51 Network > Wireless LAN > AP: Advanced Setup
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > AP: Advanced Setup
LABEL | DESCRIPTION |
RTS/CTS | Enter a value between 0 and 2432. |
Threshold |
|
|
|
Fragmentation | This is the maximum data fragment size that can be sent. Enter a value |
Threshold | between 256 and 2432. |
|
|
Output Power | Set the output power of the ZyXEL Device. If there is a high density of |
| APs in an area, decrease the output power to reduce interference with |
| other APs. Select one of the following Maximum, Middle or Minimum. |
|
|
Preamble | Select a preamble type from the |
| Short or Dynamic. The default setting is Long. See the appendix for |
| more information. |
|
|
146 |
| |
| ||
|
|
|