P314 Broadband Sharing Gateway with 4-Port Switch

Menu 24.7 -- System Maintenance - Upload Firmware

1.Upload Router Firmware

2.Upload Router Configuration File

Enter Menu Selection Number:

Figure 9-5 Menu 24.7 – System Maintenance – Upload Firmware

9.4.1 Uploading the Router Firmware

Menu 24.7.1 shows you the instructions for uploading the router firmware. Follow the procedure below to upload the file:

Step 1. Enter y at the prompt to go into debug mode. Step 2. Enter atur after Enter Debug Mode message.

Step 3. Wait for the Starting XMODEM upload message before activating Xmodem upload on your terminal.

Step 4. After successful firmware upload, enter atgo to restart the Prestige.

Menu 24.7.1 - System Maintenance - Upload Router Firmware

To upload router firmware:

1.Enter "y" at the prompt below to go into debug mode.

2.Enter "atur" after "Enter Debug Mode" message.

3.Wait for "Starting XMODEM upload" message before activating Xmodem upload on your terminal.

4.After successful firmware upload, enter "atgo" to restart the router.

Warning: Proceeding with the upload will erase the current router firmware.

Do You Wish To Proceed:(Y/N)

Figure 9-6 Menu 24.7.1 – System Maintenance – Upload Router Firmware

The screen for Menu 24.7.1 when you telnet into the Prestige (see Figure 9-8)is the same except for the following additional message.

“For details on FTP commands, please consult the documentation of your FTP client program. For details on uploading router firmware using TFTP (note that you must remain on this menu to upload router firmware using TFTP), please see your router manual.”

Transferring Files

9-5